Sputnik Agent Firmware


Sputnik-default firmware is available for devices from a wide range of manufacturers including:
Stacks Image 2288
  • Asus
  • Belkin
  • Buffalo Technologies
  • Cisco
  • Deliberant (Wiligear)
  • EnGenius Technologies
  • Linksys
  • Netgear
  • Ubiquiti Networks

Sputnik Firmware Download

Search Firmware by Vendor
Manufacturer Model Revision

Before You Flash Your Device

Reflashing your access point may violate the manufacturer’s warranty and, if performed incorrectly, could render it inoperable. Proceed at your own risk.

Follow flash upgrade instructions carefully. Sputnik does not provide free support for customer-flashed devices. If you are uncomfortable flashing your own AP, consider purchasing pre-flashed hardware from the Sputnik online store.

Sputnik Firmware Defaults

Sputnik firmware is optimized for guest Wi-Fi.
Stacks Image pp6203_n3767_n3718
  • Sputnik Agent enabled
  • IP of 192.168.180.1 (to minimize IP conflict with other devices)
  • SSID of Sputnik-Managed
  • DHCP lease settings for hotspots (100 DHCP leases, 3 hour expiration)
  • Power setting of 100 mW
  • Support for Power over Ethernet (PoE)
  • Force change router web admin password on first launch
  • Wi-Fi client isolation enabled
  • Bluetooth coexistance mode enabled
  • Support for remote firmware update
  • ttraff and upnp disabled
  • Support for USB caching (requires Pro subscription)

More Sputnik-Powered Firmware

Stacks Image 2827
Since the Sputnik Agent is a default component of DD-WRT firmware, you can also obtain firmware for many more routers at dd-wrt.com.