Upgrading Sputnik-Powered NexConnect Firmware

Download Sputnik-Powered NexConnect Firmware from NexAira's website.

Zoom

Download Sputnik Agent Firmware from the "Support" section of NexAira's website.

IMPORTANT: The NexAira NexConnect uses an incremental firmware upgrade process. This means that in order to have the latest firmware installed, all previous versions of firmware must also be installed.

Save the Sputnik-Powered NexConnect firmware to your PC.

The downloaded file will be saved to your computer. In this case, the file is named "20080313_NexAira_NexConnect_R7.00c6.BIN".

Connect your PC to the LAN port of your NexConnect.

Zoom

Connect an Ethernet cable from your PC to the LAN port on the NexConnect.

Connect to the NexConnect control panel.

Zoom

Connect to the NexConnect control panel at http://192.168.123.254.

Log into the NexConnect control panel.

Zoom

Enter system password (default is "admin"), then click "Login".

Select the Firmware Upgrade page.

Zoom

Click on the "Firmware Upgrade" menu under the "Toolbox" tab.

Select the firmware file you downloaded previously.

Zoom

Click "Browse..." and select the firmware file you downloaded previously. Click "Upgrade" to begin the flash update process.

IMPORTANT: during reflashing, do not disconnect or power down the NexConnect.